Ebac Industrial Products SPP6A commercial/military dehumidifier

More Views

Ebac Industrial Products SPP6A commercial/military dehumidifier

Be the first to review this product

In stock

MSRP : MSRP £0.00

Special Price £1,999.00

The function of a dehumidifier is to economically remove moisture directly from the air, whilst maintaining a controlled humidity level. Lack of proper humidity control exposes valuable equipment and supplies in storage to damage caused by corrosion, mould growth or general dampness. By maintaining the humidity level between 45 and 50% RH, these problems can be avoided.
DPD predict
 
 

Function:


The function of a dehumidifier is to economically remove moisture directly from the air, whilst maintaining a controlled humidity level. Lack of proper humidity control exposes valuable equipment and supplies in storage to damage caused by corrosion, mould growth or general dampness. By maintaining the humidity level between 45 and 50% RH, these problems can be avoided.


Operation:


Once positioned inside the storage area, the required level of humidity can be selected by adjusting the humidity control know to the appropriate setting. Operation is then automatic.
The unit is supplied with a monitor box which is positioned on the outside of the dehumidified area. The unit is supplied with a monitor box which is positioned on the outside of the dehumidified area.

The monitor box incorporates indicator lamps which show:


Power on
Dehumidified running
High humidity warning lamp
The monitor box allows the operation status of the dehumidifier to be confirmed without needing to enter the dehumidified area.

Applications:

The SPP6A dehumidifier is in use protecting the following:

Stores Landing Vessels

Helicopters Radar Systems
Fighting VehiclesAircraft Drop Tanks

Avionics Marine Vessels
Simulators Electrical Swichgear

Ammunition Land Vehicles Stores

Military Aircraft Aircraft Engines

Special Features:

Copper refrigeration circuit throughout for long life. Integral refrigerant compressor cut-off device. Hermetically sealed internal components minimises maintenance requirements. Stainless Steel fixings throughout.

Optional Features:

Stand available to raise unit off the ground level.

3 metres of condensate tube and worm drive securing clip.

Wall mounted kit.

Hot gas defrost and condensate frost protection for low temperature & operation.

Voltage stabiliser pack.

Paint finish to specification.

Monitor Box

3 Neon Indicator Lamps

Length: 120mm

Width: 80mm

Depth: 55mm

Construction: ABS/Poly-carbonate enclosure designed in accordance with IP65 standards.

Price includes VAT, delivery and 12 months warranty.

Please contact us if you require further information or advice.

Please note there may be a surcharge for delivery to Scottish Highlands and Islands, Northern Ireland and other remote postal codes. Please call for further information.

Please call for further information - lines are open 8am - 10pm seven days a week.

Product Specification

Weight 30.0000
Brand Ebac Industrial
Power consumption (W) No
Frequency (Hz) 50
Voltage (V) 230
Height (mm) No
Width (mm) No
Depth (mm) No
Warranty (years) No
Filter No
Timer No
Water Tank Full cut off No
Refrigerant No
Humidistat No
Tank Size (litres) No
Ioniser No
LCD Display No
Electronic Controls No
Maximum Extraction No
Operating Temperature (Deg C) No
Noise Level (dB) No
Compressor / Desiccant No
Carry Handle No
Continuous Drain Option No
Auto Restart No
Auto Defrost No
Adjustable Louvre (no / manual / electronic) No

Customer Reviews

Write Your Own Review

You're reviewing: Ebac Industrial Products SPP6A commercial/military dehumidifier

Ebac Industrial Products SPP6A commercial/military dehumidifier

GBP

£1,999.00

0

0