Do you have a swimming pool that is partially or entirely enclosed? Have you noticed condensation on your windows and a strong smell of chlorine in the air? If so, chances are good that you have an improper dehumidifier and ventilation in your poolroom area. Owning an indoor swimming pool can provide many hours of enjoyment for your family and friends. Besides the initial construction expenses, maintaining an indoor swimming pool can be expensive. You can save lots of money on energy costs by following valuable energy saving tips such as using a swimming pool dehumidifier and a correctly sized circulation pump.
The climate surrounding an indoor swimming pool is very moisture laden. Indoor pools and spas continuously produce large quantities of water vapor through the evaporation process. Picture the water surface of your pool as a large humidifier capable of adding significant amounts of moisture to your poolroom whenever the dew point of the air is less than the water temperature. This is referred to as surface condensation. It is important to keep the pool water temperature lower than the air temperature. If not, you are going to have additional energy costs because the pool is heating the room space. This will also create inevitable moisture problems. You should follow the recommended standard for
relative humidity by maintaining a RH level between 50%-60%.
Without effective swimming pool dehumidifiers and ventilation systems, you risk the appearance of mold, corrosion, structural damage and an uncomfortable pool environment. Along with a properly sized swimming pool dehumidifier, it should be emphasized that some form of ventilation is essential, regardless of your poolroom design. When air leakage carries water vapor into walls and ceilings, it is called interstitial condensation. This type of concealed condensation causes poolroom deterioration in the form of corrosion. Warm, moist air combined with
chlorine from pool chemicals attacks ferrous metals and accelerates damaging corrosion. As the chlorine-laden water vapor permeates the walls of your poolroom, it will start to deteriorate cement blocks, mortar joints, and bricks. All metal objects, including doors and light fixtures, are subject to chlorine-induced corrosion.
Once again, the primary source of high humidity in a poolroom is water evaporation from the pool surface. This is why, besides using a swimming pool dehumidifier, it is highly recommended that you use a pool cover when the pool is unoccupied. Another issue in poolrooms caused by high humidity levels is wood rot. Many indoor pools and spas use natural wood in the interior of the poolroom. Without effective dehumidification, this pricy investment runs the risk of serious deterioration.
At Dehumidifiers UK, feel free that you will always get the best customer service available to you. Whether it is a swimming pool dehumidifier, garage dehumidifier, or the best dehumidifier for your budget, feel confident shopping with us.